Automatic reset time:
188.8.131.52H (Default 12H)
Line voltage grade:
3.6V 2Ah Service life 5 Years
Earth fault warning current:
|Protection class:|| |
Short circuit warning current:
|Accuracy:||< ±10%||Action delay time:||20-300ms|
|Short circuit withstand current:||≥20kA 2S||Applicable line diameter:||≤Φ400mm|
|Weight of whole set:||<1000g||Installing hole size:||92mm×44mm|
Product Installation Dimension Drawing
Short circuit and earth fault indicator type EKL5, have signal remote transmission function and high voltage live line indicate and detection. Its in the digestion absorption based on similar advanced products at home and abroad, for urban and rural power grid ring network distribution system design of a special automatic monitoring device. In a ring network power distribution system, especially in the extensive use of ring net load switch (Ring Main Unit) system, if happened to the next level in the distribution network system short circuit or earth fault, at the next higher level power supply system must be specified in between the breaker, in order to prevent major accidents. In the breaker protection, belonging to the level of network system all the power. Through the use of this product, can rapidly and accurately indicate the faulty parts, greatly save the lookup part of the time, reduce the outage time and power scope, improve power supply reliability.
When the power supply circuit has a short circuit or earth fault occurs, the short circuit current or earth fault current make electromagnetic field changes, fixed in cable sensors on the measuring coil produce pulse signal, when the value of the pulse signal reach or more than the set of fault current value, fault indicator automatically memory fault state, fault indicator lights flashing issued instructions, at the same time by long range alarm interface, and the fault signal transmitted to the monitoring center, the staff through fault indicator signal can promptly and accurately to line fault location, timely troubleshooting, restore power supply.
◆Short circuit fault alarm indication
◆Earth fault alarm indication (Optional)
◆Low battery alarm indication
◆Remote alarm and reset
◆Automatic reset time (setable:184.108.40.206H; Default 12H)
◆Test and manual reset
◆High voltage live line indication
◆Interlocking function (Optional)
◆High voltage phase checking and electric examination
Who we are?
Chaobo Automation Technology Co., Ltd. is a professional manufacturer of all types of fault indicator, integrating development and production together. Our products include Overhead Line Fault Indicator (JDX,JDG), Cable Type Fault Indicator (2DG,2DX,2DH), Short Circuit And Earth Fault Indicator (EKL series), Digital Power Line Monitoring System (CBGZ-1000) High Voltage Live Line Indicator etc. Our company was established in 2010 located in Yueqing Wenzhou city, Zhejiang province,which is called "China Electric Capital" near Shanghai, we enjoy convenient sea, land, air transportation. and we have many years of history in produce the fault indicator.
Product Display Wall
Line Monitoring System
1. Q: Are you a direct manufacturer and exporter from China?
A: Yes, we are. We have our own factory and international sales department. We produce our own products all by ourselves.
2. Q: Where’s your factory located?
A: Our factory locates in Yueqing City, Zhejiang Province, China. It takes about 30mins by car from Wenzhou International Airport to our factory. From Shanghai to Wenzhou 45mins by air, from Shanghai to Yueqing 4hours by high-speed rail.
Welcome to visit our factory anytime. We will pickup you at airport or railway station.
3. Q: When can I get the price from you?
A: Please send us inquiry to us via website or email, and you can give us a call to tell us if your needs urgent, we’ll reply you within 24hours.
4. Q: How can I get a sample to check your quality?
A: We provide less than $50 free samples, upon you pay the courier fee. You can require for samples to check our quality. If we have stock for the models you need, the samples can be sent to you within 3 days through FedEx, UPS, TNT, DHL, etc.
5. Q: How long is the lead time?
A: Usually it takes around 3-30days after sample confirmed and deposit received (Depends on order quantity and sales season). If you need the goods urgently, please tell us, and we will try our best to give you priority.
6. Q: What should I provide if I want my own brand packaging or printing?
A: Usually you can provide us information either the four ways listed below:
1. Your brand authorizing.
2. sample packaging for us to copy.
3. layout or 3D drawing of the packaging or design.
4. the size of the product to be packed inside.
7. Q: How can I pay you?
A: For mass production goods, you need to pay 30% deposit before production and 70% balance before shipment.
The most common way to pay us is by T/T. L/C, Western Union is also acceptable.
8. Q: Can I check quality of goods before delivery?
A: Yes, either you or your company colleagues, or a third party is welcome to our factory to do the inspection before delivery.
9. Q: How the goods are delivered to me?
A: For small quantity, we advise to deliver by courier, like FedEx, UPS, DHL, etc.
For big quantity, we advise to ship by sea. We can send goods to your assigned Shipping Forwarder(FOB price). Or if you don’t have one, we can quote you CNF or CIF price.
10. Q: What about the warranty
A: We promise one year warranty, (non-artificial damage all the products free replacement within one year ) For big project our engineer service abroad.