Quantity: | |
---|---|
Product Details |
Product main function |
1.Online monitoring of the short circuit fault and earth fault, over-current, off line, theft case, load current, lack of phase, line charged off power, sending and instructions, distribution transform monitoring, user boundary fault terminal, acquisition real-time data of circuits, and so on.
2.Monitoring line load current, and display the current level on mobile phone APP, Email, save the data on the web cloud, change curve on the system center.
3.Can be used as power supply circuit maintenance intelligent inspection system, monitoring maintenance personnel whether to inspection the power line on time.
4.The hardware and software with functions of bidirectional transmission, that Can view the latest data on mobile phone APP and computer terminals.
5.Monitoring the power line other parameters, according to customer's requirements.
6.Remote sensing (remote sensing information), remote measurement, acquisition and transfer operation parameters, Including all kinds of electric parameters (on line current, frequency, etc ) and load current, etc.
7.Remote communication (remote communication information), remote signal, When the fault occurs, collect and transmit the current status information back to system center for confirmation State.
System technical characteristics |
1.Using the latest research and development of testing technology, to detect the high accuracy of fault.
2.Overhead distribution lines using the method of zero sequence current, five times harmonic method, etc. Greatly improve the single-phase grounding fault detection accuracy.
3.Inspection terminal using solar power, long service life.
4.Inspection terminal, center software has two-way communication function, that Can view the latest data on system center any time.
5.Can use the curve display line current change.
6.Can be recorded and indicates the continuous occurrence of failure.
7.The main software direct image display line operation state, straightforward, Using sound alarm after circuit malfunction, and sent SMS to related management personnel mobile phone in time.
8.The SMS to mobile phone only show the information of a test in front of the terminal, avoid all terminal transmitting before point of failure interest rates, that cause mobile phone received dozens of text messages, not easy to identify the specific point of failure.
9.Use of the existing GSM/GPRS wireless network, widely used, all the transmission lines, distribution lines, low-voltage line of one electric power company just need one monitoring center.
10.Master station software is powerful functions, have a lot of management functions, and can upgrade continuously according to user requirements.
11. Close communication with wireless communications.
Fault indicator technical parameter |
Parameter Items | Parameter Name | Parameter Details |
Electrical Parameter | Short circuit fault action current | 100A (Default,Settable,Can be set before delivery) |
Earth fault action current | 40A (The default injection method of grounding,Can be set before delivery) | |
Analog measurement cycle | Measuring one time every 30minuts (Default,Can be set before delivery) | |
Applicable voltage grade | 6~36 kV | |
Applicable wire current | 5~700A (Default) | |
Applicable power frequency | 50Hz/60Hz (According customer’s request) | |
Maximum short circuit current | 25kA/4s | |
Short circuit recognition time | 0.02~5s | |
Load measurement accuracy | ±3% | |
Power supply mode | 3.6V 2.4A Lithium battery | |
Communication mode | Radio frequency | |
Static power loss | ≤17μA | |
Action power loss | <34 mA | |
Minimum load current of the insulated cable | 10A | |
Minimum load current of the bare cable | 0A | |
Engineering Parameter | Auto reset mode | Time reset (4-72H settable) Auto reset after the power line recover (According customer’s request) |
Action times | ≥5000 Times | |
Continuous flash time | ≥3000H | |
Flash time interval | 4s±10% | |
Ambient temperature | -40 ℃~+75 ℃ | |
Relative humidity | ≤ 95% | |
Applicable wire diameter | 16~450mm2 | |
Maximum wind speed | ≤40m/s | |
Applicable altitude | ≤5000m | |
Fault alarm accuracy | ≥95% | |
Protection class | IP68 | |
Pollution class | Ⅳ | |
Working life | 10 Years | |
MTBF | 60000 H | |
Weight | 500g ±3% |
Fault data collection terminal parameter |
Parameter Items | Parameter Name | Parameter Details |
Power Loss Performance
| Static power loss | <10mA |
Maximum power loss (GPRS communication) | <1000 mA | |
Maximum power loss (Without communication) | <200 mA | |
Communication Parameters
| Radio frequency | 433M,(Free Frequency) |
GSM Transmitting and receiving performance | Meet GSM terminal industrial standards (Customize) | |
GPRS Transmitting and receiving performance | Meet GPRS terminal industrial standards (Default) | |
Power Supply Mode | Solar cell panel | 16W, 17.5V |
Storage battery | 12V, 12Ah | |
The continuous working days under darkness | More than 10 days | |
Engineering Parameter | Ambient temperature | -40 ℃ ~ +75 ℃ |
Relative humidity | ≤95% | |
Applicable altitude | ≤5000 m | |
Storage battery working life | 3~5 Years | |
MTBF | 60000 H |
Data Form |
If you want to know more about our app, please click here:https://www.fault-indicator.com/applications.html
1.Put the indicator into the installing cup and let the spring up by U-type spring lifter. (Installing cup fixed with hot stick.) | 2.Fix the spring by hook in the installing cup. Make sure two spring all fixed by hook of two side.pull out the U-type spring lifter. | 3.After two spring all fixed by hook in the installing cup, raise up the installing cup with indicator by hot stick and upward force quickly to the cable. | 4.Pull down the hot stick with installing cup, the indicator would be fixed on the cable. If failed repeat from 1 step. (Be careful of falling off) |
1.Fixed the installing cup on the hot stick, Turn the screw on the both side of the installing cup. Make the PVC sheet upspring | 2.Aim to the uninstalling indicator, then upward force, until the PVC sheet lock the indicator. | 3.Pull down the hot stick slowly until the indicator is separated from the cable. | 4.Turn the screw on the both side of the installing cup. Make the PVC sheet retract, take out the fault indicator. |
The fault data collection terminal installing on the wire pole near the fault indicator monitor within 100 meter.
Who we are?Chaobo Automation Technology Co., Ltd. is a professional manufacturer of all types of fault indicator, integrating development and production together. Our products include Overhead Line Fault Indicator (JDX,JDG), Cable Type Fault Indicator (2DG,2DX,2DH), Short Circuit And Earth Fault Indicator (EKL series), Digital Power Line Monitoring System (CBGZ-1000) High Voltage Live Line Indicator etc. Our company was established in 2010 located in Yueqing Wenzhou city, Zhejiang province,which is called "China Electric Capital" near Shanghai, we enjoy convenient sea, land, air transportation. and we have many years of history in produce the fault indicator. |
Office | Product Display Wall | Line Monitoring System |
1. Q: Are you a direct manufacturer and exporter from China?
A: Yes, we are. We have our own factory and international sales department. We produce our own products all by ourselves.
2. Q: Where’s your factory located?
A: Our factory locates in Yueqing City, Zhejiang Province, China. It takes about 30mins by car from Wenzhou International Airport to our factory. From Shanghai to Wenzhou 45mins by air, from Shanghai to Yueqing 4hours by high-speed rail.
Welcome to visit our factory anytime. We will pickup you at airport or railway station.
3. Q: When can I get the price from you?
A: Please send us inquiry to us via website or email, and you can give us a call to tell us if your needs urgent, we’ll reply you within 24hours.
4. Q: How can I get a sample to check your quality?
A: We provide less than $50 free samples, upon you pay the courier fee. You can require for samples to check our quality. If we have stock for the models you need, the samples can be sent to you within 3 days through FedEx, UPS, TNT, DHL, etc.
5. Q: How long is the lead time?
A: Usually it takes around 3-30days after sample confirmed and deposit received (Depends on order quantity and sales season). If you need the goods urgently, please tell us, and we will try our best to give you priority.
6. Q: What should I provide if I want my own brand packaging or printing?
A: Usually you can provide us information either the four ways listed below:
1. Your brand authorizing.
2. sample packaging for us to copy.
3. layout or 3D drawing of the packaging or design.
4. the size of the product to be packed inside.
7. Q: How can I pay you?
A: For mass production goods, you need to pay 30% deposit before production and 70% balance before shipment.
The most common way to pay us is by T/T. L/C, Western Union is also acceptable.
8. Q: Can I check quality of goods before delivery?
A: Yes, either you or your company colleagues, or a third party is welcome to our factory to do the inspection before delivery.
9. Q: How the goods are delivered to me?
A: For small quantity, we advise to deliver by courier, like FedEx, UPS, DHL, etc.
For big quantity, we advise to ship by sea. We can send goods to your assigned Shipping Forwarder(FOB price). Or if you don’t have one, we can quote you CNF or CIF price.
10. Q: What about the warranty
A: We promise one year warranty, (non-artificial damage all the products free replacement within one year ) For big project our engineer service abroad.