 cb@zjchaobo.com    +86-18958973837
You are here: Home / Products / Overhead Line Fault Indicator / CBDL-JDG Pull Rod Type Overhead Line Fault Indicator with LED

CBDL-JDG Pull Rod Type Overhead Line Fault Indicator with LED

Share to:
Overhead Line Fault Indicator With LED for out door overhead Line 5-36KV. indication the line short circuit (phase to phase) and earth fault (phase to earth).
  • IP68
  • Zhejiang, China
  • Outdoor Overhead Line
  • Outdoor Overhead 5-36KV High Voltage Cable
  • 0-40mm
  • U≥5-36KV
  • ≥5000Times
  • -35℃≤T≤+70℃
  • Pull Rod Type With LED

overhead 应用

Product Detail

CBDL-JDG Pull rod 详情1

CBDL-JDG Pull rod 详情2

Technical Parameters

Applicable voltage grade:


Applicable wire current:


Applicable wire diameter:

16mm sq≤D≤240mm sq

Action response time:


Reset time:

6,12,24,48H (Selectable, Default 24H)

Ambient temperature:


Operation times:


Static power loss:


Protection class:


JDG LED lumens:



拉杆 尺寸图

The shell using high strength and high transparency aeronautical material Fully Fashioned, and treated with nanotechnology, better perspectivity. resist filth, anti-aging, without maintenance, long service life.

◆ Built-in high performance lithium battery, Service life can reach more than eight years.

◆ The circuit board using special chip and MCU etc imported Components.

◆ The shell made from aeronautical material and nano materials.

◆ The clamp with nickel plating process, best magnetic conductivity, Install and Remove with Electricity.

◆ Fault indication turn card with strong visual,it can clear instructions with light in the night, and the color not fade under sun ultraviolet light for a long time.

Function and Benefit

◆ Indicate the fault line and fault point quickly, lessen the blackout area;

◆ Shorten troubleshooting time,improving electricity and power supply reliability;

◆ Accurately indicate the instant fault, which is conducive to rule out the power supply problems;

◆ Providing technical means for find the hidden permanent fault point;

◆ Shorten the search time to find the fault point, reduce the labor intensity of line patrol person;

◆ Defining the responsibility of the fault area and responsible people;

◆ Avoiding traditional multiple switch out,switch on,line patrol to the effects of power equipment.

Used to judge the short circuit fault indicator diagram

short circuit judgment

As line 2# B phase 2,5,8 indicator and line 2# C phase 3,6,9 indicator turn red, but the 11,12 indicator still show white, that judged the point D happen short circuit.

Used to judge the earth fault indicator diagram

Earth fault judgment

As line 2# C phase 3,6,9 indicator turn red,but the 12 indicator still show white, that judged the point D happen earth fault.

Fault Indicator Installing and Uninstalling

Fault indicator installing guide


1.Put the indicator into the installing cup  (Installing cup fixed with hot stick.)


2.Pull the rod to make sure the rod fixed on the side. 


3.Push the indicator up hard against the cable.


4.Pull down the hot stick with installing cup, the indicator would be fixed on the cable.  

If failed repeat from 1 step. (Be careful of falling off)

ATTENTION: This type fault indicator can live line installation but must power off when uninstallation.


Who we are?

Chaobo Automation Technology Co., Ltd. is a professional manufacturer of all types of fault indicator, integrating development and production together. Our products include Overhead Line Fault Indicator (JDX,JDG), Cable Type Fault Indicator (2DG,2DX,2DH), Short Circuit And Earth Fault Indicator (EKL series), Digital Power Line Monitoring System (CBGZ-1000) High Voltage Live Line Indicator etc. Our company was established in 2010 located in Yueqing Wenzhou city, Zhejiang province,which is called "China Electric Capital" near Shanghai, we enjoy convenient sea, land, air transportation. and we have many years of history in produce the fault indicator. 




Product Display Wall

Line Monitoring System


1. Q: Are you a direct manufacturer and exporter from China?

A: Yes, we are. We have our own factory and international sales department. We produce our own products all by ourselves.


2. Q: Where’s your factory located?

A: Our factory locates in Yueqing City, Zhejiang Province, China. It takes about 30mins by car from Wenzhou International Airport to our factory. From Shanghai to Wenzhou 45mins by air, from Shanghai to Yueqing 4hours by high-speed rail.

Welcome to visit our factory anytime. We will pickup you at airport or railway station.


3. Q: When can I get the price from you?

A: Please send us inquiry to us via website or email, and you can give us a call to tell us if your needs urgent, we’ll reply you within 24hours.


4. Q: How can I get a sample to check your quality?

A: We provide less than $50 free samples, upon you pay the courier fee. You can require for samples to check our quality. If we have stock for the models you need, the samples can be sent to you within 3 days through FedEx, UPS, TNT, DHL, etc.


5. Q: How long is the lead time?

A: Usually it takes around 3-30days after sample confirmed and deposit received (Depends on order quantity and sales season). If you need the goods urgently, please tell us, and we will try our best to give you priority.


6. Q: What should I provide if I want my own brand packaging or printing?

A: Usually you can provide us information either the four ways listed below:

1. Your brand authorizing.

2. sample packaging for us to copy.

3. layout or 3D drawing of the packaging or design.

4. the size of the product to be packed inside.


7. Q: How can I pay you?

A: For mass production goods, you need to pay 30% deposit before production and 70% balance before shipment.

The most common way to pay us is by T/T. L/C, Western Union is also acceptable.


8. Q: Can I check quality of goods before delivery?

A: Yes, either you or your company colleagues, or a third party is welcome to our factory to do the inspection before delivery.


9. Q: How the goods are delivered to me?

A: For small quantity, we advise to deliver by courier, like FedEx, UPS, DHL, etc.

For big quantity, we advise to ship by sea. We can send goods to your assigned Shipping Forwarder(FOB price). Or if you don’t have one, we can quote you CNF or CIF price.


10. Q: What about the warranty

A: We promise one year warranty, (non-artificial damage all the products free replacement within one year ) For big project our engineer service abroad.

Product Inquiry
Unit 5-1 Building 5, Botong Huigu Micro Industry Park, No. 66 Binhai Nan Si Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China.

About us

Chaobo Automation Technology Co., Ltd. is a professional manufacturer of all types of fault indicator.

Quick links