Product Categories
Contact Us

CHAOBO AUTOMATION TECHNOLOGY CO., LTD

Add:No.261 Weishiqi Road, Yueqing Economic and Development Zone, Yueqing, Zhejiang, China

Contact:Ajia Zhang

Tel:+86-577-88111511

Fax:+86-577-62802341

Mobile:+86-18958973837

E-mail:cb@zjchaobo.com

Skype: Ajia Zhang

News

Line Fault Indicator You Can Know The Occurrence Of The Fault Early

The battery line fault indicator is used to display the working status of the car battery, its color is usually red or yellow. Twist the key, the vehicle self-test when the line fault indicator will light up, start the car after the line fault indicator automatically extinguished. If the car after the start of the line fault indicator light is always bright, it is to remind you that the battery has a problem, the check or replaced.

If there is no problem with the battery connection, but the line fault indicator is still on, and the use of the vehicle and the use of electronic equipment may be affected, it may be a battery failure, should be the fault of the battery, Check and replace the battery as soon as possible.

The oil line fault indicator is used to display the oil and pressure status of the engine oil, and its color is red or yellow. Twist the key, the vehicle self-test when the line fault indicator will light up, start the car after the line fault indicator automatically extinguished. If the line fault indicator light is on, it may be oil stock and pressure below the standard value. Therefore, before traveling by car, we should be prepared in the car a bottle of oil supply urgent use.

Coping method: first check the stock of oil, if the oil appears a short period of time is not normal reduction, it is likely that there is leakage or burning oil situation, the owner should be the vehicle to the nearest maintenance agencies to conduct a thorough inspection and repair.

Water temperature line fault indicator light to display the vehicle engine coolant temperature, the color to yellow-based. Some models without water temperature table (such as the Great Wall Mini Car series) will show the coolant temperature in the color of the line fault indicator: blue represents the water temperature is too low, extinguished on behalf of the normal water temperature, red on behalf of the water temperature is too high. Under normal circumstances, twist the key, the vehicle self-test when the water temperature line fault indicator will light up, start the car after the line fault indicator automatically extinguished. If the line fault indicator light is on after the start of the car, it means that the coolant temperature exceeds the specified value.

Coping method: When the water temperature is too high, we should immediately stop the car in a safe place, turn off and open the hood to heat, this time should not open the water tank cover, because the inside of the high temperature liquid will splash out, causing serious hurt.

The line fault indicator is used to display the stock of the glass cleaner, and it is in the normal state. If the line fault indicator light is on, it means that the vehicle is filled with glass cleaner.

Coping method: If you encounter in the course of self-driving process of glass cleaning fluid is not enough, the car does not have a special cleaning fluid, then we can add a clean water to the tank emergency.