You are here: Home / Products / Overhead Line Fault Indicator / CBDL-JDX Pressure Spring Type Overhead Line Fault Indicator Without LED

CBDL-JDX Pressure Spring Type Overhead Line Fault Indicator Without LED

Pressure Spring Type Overhead Line Fault Indicator Without LED for outdoor overhead Line 5-36KV. indication the line short circuit (phase to phase) and earth fault (phase to earth).

Model: CBDL-JDX
Brand: CHAOBO
Protection Class: IP68
Place of Origin: Zhejiang, China
Usage: Outdoor Overhead Line
Application: Outdoor Overhead 5-36KV High Voltage Cable
Cable diameter: 0-40mm
Applicable Voltage Grade: U≥5-36KV
Operation Times: ≥5000Times
Ambient Temperature: -35℃≤T≤+70℃
Joint Type: Pressure Spring Type With LED

Availability:

Quantity:


Inquire Add to Basket

overhead 应用

Product Detail

压簧 JDX 详情页1

压簧 JDX 详情页2

Technical Parameters

Applicable voltage grade:	U≥6-35KV	Applicable wire current:	I≤1200A
Applicable wire diameter:	16mm sq≤D≤240mm sq	Action response time:	0.06s≤t≤3s
Reset time:	6,12,24,48H (Selectable, Default 24H)	Ambient temperature:	-35℃≤T≤+70℃
Operation times:	≥5000Times	Static power loss:	≤10μW
Protection class:	IP68	JDG LED lumens:	30-50Lm

Characteristic

The shell using high strength and high transparency aeronautical material Fully Fashioned, and treated with nanotechnology, better perspectivity. resist filth, anti-aging, without maintenance, long service life.

◆ Built-in high performance lithium battery, Service life can reach more than eight years.

◆ The circuit board using special chip and MCU etc imported Components.

◆ The shell made from aeronautical material and nano materials.

◆ The clamp with nickel plating process, best magnetic conductivity, Install and Remove with Electricity.

◆ Fault indication turn card with strong visual,it can clear instructions with light in the night, and the color not fade under sun ultraviolet light for a long time.

Function and Benefit

◆ Indicate the fault line and fault point quickly, lessen the blackout area;

◆ Shorten troubleshooting time,improving electricity and power supply reliability;

◆ Accurately indicate the instant fault, which is conducive to rule out the power supply problems;

◆ Providing technical means for find the hidden permanent fault point;

◆ Shorten the search time to find the fault point, reduce the labor intensity of line patrol person;

◆ Defining the responsibility of the fault area and responsible people;

◆ Avoiding traditional multiple switch out,switch on,line patrol to the effects of power equipment.

Used to judge the short circuit fault indicator diagram

short circuit judgment

As line 2# B phase 2,5,8 indicator and line 2# C phase 3,6,9 indicator turn red, but the 11,12 indicator still show white, that judged the point D happen short circuit.

Used to judge the earth fault indicator diagram

Earth fault judgment

As line 2# C phase 3,6,9 indicator turn red,but the 12 indicator still show white, that judged the point D happen earth fault.

Fault Indicator Installing and Uninstalling

Fault indicator installing guide

1.Put the indicator into the installing cup and let the spring up by U-type spring lifter. (Installing cup fixed with hot stick.)

2.Fix the spring by hook in the installing cup. Make sure two spring all fixed by hook of two side.pull out the U-type spring lifter.

3.After two spring all fixed by hook in the installing cup, raise up the installing cup with indicator by hot stick and upward force quickly to the cable.

4.Pull down the hot stick with installing cup, the indicator would be fixed on the cable. If failed repeat from 1 step. (Be careful of falling off)

Fault indicator uninstalling guide

1.Fixed the installing cup on the hot stick, Relax the iron sheet on the both side of the installing cup. Make the iron sheet like two hooks.

2.Aim to the uninstalling indicator, then upward force, until the iron sheet lock the indicator.

3.Pull down the hot stick slowly until the indicator is separated from the cable.

4.Push the iron sheet on the both side of the installing cup. Make the iron sheet retract, take out the fault indicator.

1. Q: Are you a direct manufacturer and exporter from China?

A: Yes, we are. We have our own factory and international sales department. We produce our own products all by ourselves.

2. Q: Where’s your factory located?

A: Our factory locates in Yueqing City, Zhejiang Province, China. It takes about 30mins by car from Wenzhou International Airport to our factory. From Shanghai to Wenzhou 45mins by air, from Shanghai to Yueqing 4hours by high-speed rail.

Welcome to visit our factory anytime. We will pickup you at airport or railway station.

3. Q: When can I get the price from you?

A: Please send us inquiry to us via website or email, and you can give us a call to tell us if your needs urgent, we’ll reply you within 24hours.

4. Q: How can I get a sample to check your quality?

A: We provide less than $50 free samples, upon you pay the courier fee. You can require for samples to check our quality. If we have stock for the models you need, the samples can be sent to you within 3 days through FedEx, UPS, TNT, DHL, etc.

5. Q: How long is the lead time?

A: Usually it takes around 3-30days after sample confirmed and deposit received (Depends on order quantity and sales season). If you need the goods urgently, please tell us, and we will try our best to give you priority.

6. Q: What should I provide if I want my own brand packaging or printing?

A: Usually you can provide us information either the four ways listed below:

1. Your brand authorizing.

2. sample packaging for us to copy.

3. layout or 3D drawing of the packaging or design.

4. the size of the product to be packed inside.

7. Q: How can I pay you?

A: For mass production goods, you need to pay 30% deposit before production and 70% balance before shipment.

The most common way to pay us is by T/T. L/C, Western Union is also acceptable.

8. Q: Can I check quality of goods before delivery?

A: Yes, either you or your company colleagues, or a third party is welcome to our factory to do the inspection before delivery.

9. Q: How the goods are delivered to me?

A: For small quantity, we advise to deliver by courier, like FedEx, UPS, DHL, etc.

For big quantity, we advise to ship by sea. We can send goods to your assigned Shipping Forwarder(FOB price). Or if you don’t have one, we can quote you CNF or CIF price.

10. Q: What about the warranty

A: We promise one year warranty, (non-artificial damage all the products free replacement within one year ) For big project our engineer service abroad.